Saint-Gobain Abrasive Particles
Lapping Vehicles and Lubricants

MCA-897A

Lapping Vehicles and Lubricants

Product Code: MCA-897A

CRE MCA-897A is an oil based slurry/vehicle that can be used straight as an oil based slurry or used as a concentrate by diluting it with water.


MCA-897A can be diluted up to 1:2 with water. For most applications, the recommended dilutation ratio is 1:1. When diluted 1:1 with water, the slurry can suspend up to 20µ particles. Depending on the dilution ratio and the required viscosity, this slurry can be made to suspend up to 60µ particles. This slurry is safe to work with and comply with EPA and OSHA safety requirements. It contains cut-rate enhancers to give aggressive cutting action during lapping and lubricants to help reduce scratching and subsurface damage in the work piece.

All slurries are made using highly refined powders that have tight sizing, high bulk purity, and high surface purity. 

 

 


Applications

  • Piston rings
  • Precision bearings
  • Aerospace parts
  • Seals, rings and gears

 

  • Provides fast MRR and controlled surface finish
  • Excellent dispersion properties to minimize agglomeration in solution
  • Excellent suspension properties
  • ISO Certified to always bring consistency to Quality
  • Ability to customize products for any specialized applications
  • Available in both ready-to-use and dilutable concentrates forms
  • CRE lapped metal parts can be cleaned easily with commercially available alkaline cleaners
  • Knowledgeable application engineers available for technical support